World Cement - North America 2019

17 / 60

Who likes to be rescued? We all like to think of
ourselves as self-sufficient and independent. Yet
there are those times when we all need a little help
because the circumstances that we face can be a
bit overwhelming. Those
are when we find out who
our real friends are--those
who come to the rescue
and help us to the end.
Sometimes a timely word
of advice has saved the
day. Other times it was
just good people willing
to roll up their sleeves
and pitch in to do some hard work. So being res-
cued out of a jam isn’t all bad. It can make many
unsuspecting people heroes in our lives if not for
just a moment and make for some life long rela-
tionships.
Over the years we at Wear-
Con have seen our share of
seemingly impossible situa-
tions. Regardless of the cir-
cumstance, a hero always
came to the rescue. Now
when we get a call from a
customer who is between
that proverbial “rock and a
hard place,” we can relate.
We’re so often told by them that nothing will work
and they have tried everything. Yet we know that
a solution can be found. On many occasions that
“last resort” option is something they have never
heard of, such as SHC800™ Wear Panels. SHC800™ is a
proprietary blend of alloys cast into wear panels.
They are extremely impact resistant and abrasion
resistant. SHC800™ Wear Panels have come to the
rescue in as many applications as there are cus-
tomers that continue to use them. It has been sug-
gested that the SHC in SHC800™ Wear Panels should
stand for Super Hero Composite. Let’s just say
they consistently save the day!
There are many unique applications where Wear-
Con’s SHC800™ Wear Panels have come to the res-
cue and continue to maintain the fight against
wear every minute of every day. Here are several
applications that are now protected.
• Impact zones in chutes and hoppers are prime
locations for SHC800™ Wear Panels.
• Feeders take a tremendous amount of punish-
ment. SHC800™ Wear Panels are well suited for
them.
• Wear-Concepts fabricates custom SkirtBoards™
lined with SHC800™ Wear Panels for all kinds of
conveying applications.
• Lining transitions with SHC800™ Wear Panels
can be a near permanent solution for wear.
You Need A Hero
“It has been suggested that
the SHC in SHC800™ Wear
Panels should stand for
Super Hero Composite!”
• Raw mills take so much abuse. SHC800™ Wear
Panels can be strategically placed to shield and
protect in a variety of places. Just recently we tiled
raw mill cone sections with 6” x 6” SHC800™ Wear
Panels. It was a new ap-
plication for us.
• Deflectors are a perfect
application for SHC800™
Wear Panels. Pug mill
paddles are also made out
of SHC800™ Wear Panels.
These are just a few of the
hundreds of applications
were Wear-Con has been involved in the applica-
tion of SHC800™ Wear Panels coming to the rescue.
Where can they be a hero for you? Chances are
that you have a unique spot where the crime of
wear is being committed. Give us a call or email
us so we can help you arrest and eradicate the per-
petrator.
For more information about
SHC800™ Wear Panels,
contact Wear-Concepts at:
1-888-4WEARCON or 816-587-1923
•
Advertisement Feature